Audi TTS OBD-II support
Model years 2008 to 2023CombustionOnboarded
269 miles driven with Pelican by 3 drivers
433 kilometers driven with Pelican by 3 drivers
The OBDb lists 866 parameters for the Audi TTS, read from 4 control modules. Real responses from Audi TTS cars confirm 22 of the parameters. Drivers have tested model years 2015.
Support by model year
A solid mark means a real response confirmed the parameter. A light mark means the car's signalset reads it but no response has confirmed it yet.
| Year | Status | Fuel | Speed | Range | OdoOdometer | Tires |
|---|---|---|---|---|---|---|
| 2008 to 2014 | Onboarded | Tire pressures: No data | ||||
| 2015 to 2023 | Onboarded | Estimated | Tire pressures: No data |
Confirmed by a real response Read by the signalset, not yet confirmed
Parameters
The parameters of the Audi TTS, by group. These are the commands that Audi added, and the SAE J1979 standard parameters that real cars confirm. Open a group to see its parameters, how Pelican decodes each one, and the model years that real cars confirm.
- Connectables23
- Battery59
- Climate4
- Clocks1
- Control12
- Drivetrain2
- DTCs4
- ECU1
- Engine524
- Fuel52
- Movement54
- Transmission129
- Trips38
Connectables23
Automatic transmission fluid temperature, Battery voltage, Calculated oil temperature, Control module voltage and 19 more9 of 23 parameters confirmed14 being tested9/23Battery59
Accelerator pedal, sensor 1 voltage, Accelerator pedal, sensor 2 voltage, Aux. hydraulic pump voltage, Battery internal resistance and 55 more9 of 59 parameters confirmed50 being tested9/59Climate4
Ambient air temperature, Ambient air temperature, Ambient temperature, Barometric pressure2 of 4 parameters confirmed2 being tested2/4Clocks1
Time since engine startConfirmed1/1Control10
Accelerator pedal release detection threshold voltage, Brake booster low pressure, actual, Brake booster pressure, Brake booster pressure and 6 more1 of 10 parameters confirmed9 being tested1/10Control › Pedals2
Accelerator pedal position sensor 1, Accelerator pedal position sensor 2All parameters confirmed2/2Drivetrain2
Driver torque requested #1, Driver torque requested #22 being tested0/2DTCs4
Distance traveled since diagnostic trouble codes cleared, Distance traveled since diagnostic trouble codes cleared, Distance traveled while mil was activated, Number of warm-ups since diagnostic trouble codes clearedAll parameters confirmed4/4ECU1
Oil thermal wear1 being tested0/1Engine518
A/C compressor torque, A/C refrigerant pressure, Adaptation of loss torque, Adaptation of throttle valve and 514 more5 of 518 parameters confirmed513 being tested5/518Engine › Internal6
Boost pressure A control status supported, Boost pressure A supported, Boost pressure B control status supported, Boost pressure B supported and 2 moreAll parameters confirmed6/6Fuel52
Activation of fuel pump electronics, Counter of fuel entry in oil, Error counter bad fuel, Fuel consumption and 48 more1 of 52 parameters confirmed51 being tested1/52Movement54
Acceleration, Acceleration, Acceleration, Acceleration and 50 more3 of 54 parameters confirmed51 being tested3/54Transmission129
Actual position of gear positioner a, Actual position of gear positioner b, Actual position of gear positioner c, Actual position of gear positioner d and 125 more129 being tested0/129Trips38
Analysis, clutch 1 temperature time in range 1, Analysis, clutch 1 temperature time in range 2, Analysis, clutch 1 temperature time in range 3, Analysis, clutch 2 temperature time in range 0 and 34 more2 of 38 parameters confirmed36 being tested2/38
Help onboard this car
Help onboard more cars to the OBDb simply by installing Pelican, connecting your OBD scanner, and driving. Joining the beta testing crew gives you early access to upcoming Pelican features through limited-access TestFlight builds.
