Scion iQ OBD-II support
Model years 2012 to 2015CombustionTester needed
The OBDb lists 541 parameters for the Scion iQ, read from 12 control modules. No driver has confirmed any of the parameters with a real response yet.
Support by model year
A solid mark means a real response confirmed the parameter. A light mark means the car's signalset reads it but no response has confirmed it yet.
| Year | Status | Fuel | Speed | Range | OdoOdometer | Tires |
|---|---|---|---|---|---|---|
| 2012 to 2015 | Tester needed | Estimated |
Confirmed by a real response Read by the signalset, not yet confirmed
Parameters
The parameters of the Scion iQ, by group. These are the commands that Scion added, and the SAE J1979 standard parameters that real cars confirm. Open a group to see its parameters, how Pelican decodes each one, and the model years that real cars confirm.
- Connectables37
- Battery33
- Climate16
- Control35
- Cruise control1
- Details1
- Drivetrain1
- DTCs23
- ECU2
- Electrical1
- Engine242
- Fluids1
- Fuel37
- Lights9
- Movement36
- Orientation13
- Seatbelts6
- Tires50
- Transmission29
- Trips5
Connectables37
Air-fuel equivalence ratio, bank 1 sensor 1, Average engine speed of all cylinders, B+ battery voltage, Battery voltage and 33 more37 being tested0/37Battery33
+BM voltage, 1st turbocharger outlet pressure, control valve, 2nd turbocharger outlet pressure, 2nd turbocharger outlet pressure, control valve and 29 more33 being tested0/33Climate16
Adjusted ambient temperature, Air inlet damper actual pulse, Air inlet damper target pulse, Air outlet servo actual pulse, driver and 12 more16 being tested0/16Control35
A/C compressor, Accelerator pedal, Accelerator sensor voltage, 1, Accelerator sensor voltage, 2 and 31 more35 being tested0/35Cruise control1
Cruise control speed1 being tested0/1Details1
Inspection mode1 being tested0/1Drivetrain1
Coupling temperature1 being tested0/1DTCs23
2nd air monitor available?, 2nd air monitor incomplete?, A/C monitor available?, A/C monitor incomplete? and 19 more23 being tested0/23ECU2
VVT-ie duty ratio bank 1, VVT-ie motor direction: forward bank 12 being tested0/2Electrical1
B+ battery voltage1 being tested0/1Engine233
A/F heater duty bank 1 sensor 1, A/F ratio learn value high, bank 1, A/F ratio learn value idle, bank 1, A/F ratio learn value low, bank 1 and 229 more233 being tested0/233Engine › Catalyst2
Catalyst temperature, bank 1 sensor 1, Catalyst temperature, bank 1 sensor 22 being tested0/2Engine › Misfires7
All cylinders misfire count, Cylinder #1 misfire count, Cylinder #2 misfire count, Cylinder #3 misfire count and 3 more7 being tested0/7Fluids1
Distance since oil change1 being tested0/1Fuel37
Engine fuel rate, Fuel cut, Fuel cut, Fuel cut time and 33 more37 being tested0/37Lights9
Check engine SW, Hazard switch history, Oil pressure switch, P-seatbelt buckle SW and 5 more9 being tested0/9Movement36
Accelerator fully close learn 1, Accelerator fully close learn 2, Accelerator idle position on, Accelerator position and 32 more36 being tested0/36Orientation13
Deceleration, Deceleration 2, Deceleration open, Lateral g and 9 more13 being tested0/13Seatbelts6
Buckle switch, left side, Buckle switch, right side, Reverse beep, Seat belt beep, driver and 2 more6 being tested0/6Tires50
Brake assist status, Front left tire pressure, Front left tire pressure, Front left tire temperature and 46 more50 being tested0/50Transmission29
Current gear, Front axle coupling clutch current, Front axle coupling clutch position sensor status, Gear and 25 more29 being tested0/29Trips5
Odometer, Odometer, Odometer, Previous trip distance and 1 more5 being tested0/5
Help onboard this car
Help onboard more cars to the OBDb simply by installing Pelican, connecting your OBD scanner, and driving. Joining the beta testing crew gives you early access to upcoming Pelican features through limited-access TestFlight builds.
