Holden Cruze

Parameters

The Holden Cruze has 200 parameters.

● Confirmed◆ In testing○ Supported× Not supported

How to read a parameter card

Control module voltage CRUZE_CTRL_MODULE_VConfirmed

Pelican can show this parameter as the starter battery voltage.

  • Service 22DID 0042
  • Module7E0 → 7E8
  • Every5 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val1000
Range
0 to 65.53 V
Unit
V

0x0000 = 0 → 01000 = 0 V

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

  1. The parameter's name and its ID in the OBDb. Confirmed shows when a response from a real car confirms the parameter.
  2. The clutch mark shows a Connectable, a parameter that Pelican surfaces in its interface.
  3. The service and PID/DID asked for, the control module it's sent to, and how often Pelican asks.
  4. The reply's bytes. The parameter's bytes are blue. Bytes for other parameters in the same reply are grayed out. Hover over a byte to see the parameter it represents.
  5. Where the parameter is in the response, and how Pelican converts the raw value into a value.
  6. A real reply, decoded. The raw value comes first, then the reading.
  7. Which model years have tested this parameter.

Battery

Charge air cooler temperature sensor 1 CRUZE_CHARGE_AIR_COOLER_T_SNS_1

  • Service 22DID 30AD
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Charge air cooler temperature sensor 2 CRUZE_CHARGE_AIR_COOLER_T_SNS_2

  • Service 22DID 30AE
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Control module voltage CRUZE_CTRL_MODULE_VConfirmed

Pelican can show this parameter as the starter battery voltage.

  • Service 22DID 0042
  • Module7E0 → 7E8
  • Every5 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val1000
Range
0 to 65.53 V
Unit
V

0x0000 = 0 → 01000 = 0 V

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Control module voltage VPWRSAE J1979Confirmed

Power input to the OBD control module. VPWR is normally battery voltage, less any voltage drop in the circuit between the battery and the control module.

Pelican can show this parameter as the starter battery voltage.

  • Service 01PID 42
  • Module7E0 → 7E8
  • Every10 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val1000
Range
0 to 65.535 V
Unit
V

Confirmed for 2013, 2015.

Ignition 1 voltage CRUZE_IGN_1_VConfirmed

  • Service 22DID 1141
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val10
Range
0 to 25.5 V
Unit
V

0x00 = 0 → 010 = 0 V

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Climate

Ambient air temperature AATSAE J1979Confirmed

  • Service 01PID 46
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

Confirmed for 2013, 2015.

Clocks

Time since engine start CRUZE_RUNTMConfirmed

  • Service 22DID 11A1
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2012, 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 s
Unit
s

0x0000 = 0 → 0 s

Confirmed for 2013, 2015. In testing for 2002 to 2006, 2009 to 2012, 2014, 2016.

Time since engine start RUNTMSAE J1979Confirmed

Increments while the engine is running. Freezes if the engine stalls. Resets to zero during every control module power-up and when entering the key-on, engine off position. Limited to 65,535 seconds and will not wrap around to zero.

  • Service 01PID 1F
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 s
Unit
s

Confirmed for 2015. Supported for 2013.

Control

Absolute throttle position TPSAE J1979Confirmed

Throttle position at idle will usually be more than 0%, and throttle position at wide open throttle will usually be less than 100%.

Pelican can show this parameter as the throttle position.

  • Service 01PID 11
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

Absolute throttle position B TP_BSAE J1979Confirmed

Pelican can show this parameter as the throttle position.

  • Service 01PID 47
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

Relative throttle position TP_RSAE J1979Confirmed

Relative or 'learned' throttle position.

  • Service 01PID 45
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2015.

Pedals

Accelerator pedal position D APP_DSAE J1979Confirmed

  • Service 01PID 49
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

Accelerator pedal position E APP_ESAE J1979Confirmed

  • Service 01PID 4A
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

DTCs

Distance traveled since diagnostic trouble codes cleared CLR_DISTSAE J1979Confirmed

Distance accumulated since DTCs were cleared (via an external test equipment or possibly, a battery disconnect). This parameter is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 65,535 km have occurred, will remain at 65,535 km and not wrap to zero.

Pelican can show this parameter as the distance since trouble codes were cleared.

  • Service 01PID 31
  • Module7E0 → 7E8
  • Every15 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2013, 2015.

Distance traveled while MIL was activated MIL_DISTSAE J1979Confirmed

Resets to zero when MIL changes from deactivated to activated, if diagnostic information is cleared, or if at least 40 warm-up cycles occur without MIL being activated.

  • Service 01PID 21
  • Module7E0 → 7E8
  • Every5 s

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 km
Unit
km

Confirmed for 2015. Supported for 2013.

Malfunction indicator lamp MILSAE J1979Confirmed

The MIL status is OFF during key-on, engine-off bulb check unless MIL has also been commanded ON for a detected malfunction. The status reflects whether there are confirmed DTC(s) stored that are illuminating the MIL. It should not reflect the status of the MIL, which could be on for a function check, flashing I/M readiness or flashing for misfire.

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 0 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

Confirmed for 2015. Supported for 2013.

Number of DTCs stored in this ECU DTC_CNTSAE J1979Confirmed

Number of confirmed emission-related DTCs stored in the ECU available for display using Service $03.

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bits 1 to 7 of the reply, 7 bits.

Formula
val
Range
0 to 127
Unit
Number

Confirmed for 2015. Supported for 2013.

Number of warm-ups since diagnostic trouble codes cleared WARM_UPSSAE J1979Confirmed

Number of OBD warm-up cycles since all DTCs were cleared (via an external test equipment or possibly, a battery disconnect). A warm-up is defined in the OBD regulations to be sufficient vehicle operation such that coolant temperature rises by at least 22°C (40°F) from engine starting and reaches a minimum temperature of 70°C (160°F) (60°C (140°F) for diesels). This PID is not associated with any particular DTC. It is simply an indication for inspection/maintenance, of the last time an external test equipment was used to clear DTCs. If greater than 255 warm-ups have occurred, this parameter will remain at 255 and not wrap to zero.

  • Service 01PID 30
  • Module7E0 → 7E8
  • Every60 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

Confirmed for 2015. Supported for 2013.

Status

A/C system refrigerant monitoring ACRF_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 19 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

A/C system refrigerant monitoring completed ACRFCMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 27 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

A/C system refrigerant monitoring ready ACRF_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 27 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Catalyst monitoring CAT_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 23 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Catalyst monitoring completed CAT_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 31 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Catalyst monitoring ready CAT_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 31 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Comprehensive component monitoring completed CCM_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 9 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Comprehensive component monitoring ready CCM_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 9 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

EGR system monitoring EGR_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 16 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

EGR system monitoring completed EGR_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 24 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

EGR system monitoring ready EGR_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 24 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Evaporative system monitoring EVAP_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 21 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Evaporative system monitoring completed EVAPCMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 29 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Evaporative system monitoring ready EVAP_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 29 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Fuel system monitoring completed FUEL_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 10 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Fuel system monitoring ready FUEL_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 10 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Heated catalyst monitoring HCAT_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 22 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Heated catalyst monitoring completed HCATCMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 30 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Heated catalyst monitoring ready HCAT_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 30 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Misfire monitoring completed MIS_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 11 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Misfire monitoring ready MIS_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 11 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Oxygen sensor heater monitoring HTR_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 17 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Oxygen sensor heater monitoring completed HTR_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 25 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Oxygen sensor heater monitoring ready HTR_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 25 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Oxygen sensor monitoring O2S_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 18 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Oxygen sensor monitoring completed O2S_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 26 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Oxygen sensor monitoring ready O2S_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 26 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Secondary air system monitoring AIR_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 20 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Secondary air system monitoring completed AIR_CMPLSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 28 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Secondary air system monitoring ready AIR_RDYSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 28 of the reply.

Formula
val
Range
0 to 1
Unit
Yes or no

Confirmed for 2015. Supported for 2013.

Support

A/C system refrigerant monitoring supported ACRF_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 19 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Catalyst monitoring supported CAT_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 23 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Comprehensive component monitoring enabled CCM_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 13 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Comprehensive component monitoring supported CCM_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 13 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Compression ignition monitoring supported CIM_SUPSAE J1979Confirmed

Indicates support of spark ignition or compression ignition monitors.

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 12 of the reply.

Unit
Named states
States
Raw valueStateMeaning
0SPARKSpark ignition monitors supported
1COMPRESSIONCompression ignition monitors supported

Confirmed for 2015. Supported for 2013.

Compression ignition monitoring supported CIM_SUP_FLAGSAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 12 of the reply.

Unit
Named states
States
Raw valueStateMeaning
0SPARKSpark ignition monitors supported
1COMPRESSIONCompression ignition monitors supported

Confirmed for 2015. Supported for 2013.

EGR system monitoring supported EGR_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 16 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Evaporative system monitoring supported EVAP_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 21 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Fuel system monitoring enabled FUEL_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 14 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Fuel system monitoring supported FUEL_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 14 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Heated catalyst monitoring supported HCAT_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 22 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Misfire monitoring enabled MIS_ENASAE J1979Confirmed

  • Service 01PID 41
  • Module7E0 → 7E8
  • Every1 s

Bit 15 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Misfire monitoring supported MIS_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 15 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Oxygen sensor heater monitoring supported HTR_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 17 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Oxygen sensor monitoring supported O2S_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 18 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Secondary air system monitoring supported AIR_SUPSAE J1979Confirmed

  • Service 01PID 01
  • Module7E0 → 7E8
  • Every10 s

Bit 20 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

Engine

1-2 shift error CRUZE_1_2_SHIFT_ERROR

  • Service 22DID 1997
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val40
Range
0 to 6.375 s
Unit
s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

1-2 shift time CRUZE_1_2_SHIFT_TIME

  • Service 22DID 1993
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val40
Range
0 to 6.375 s
Unit
s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

2-3 shift error CRUZE_2_3_SHIFT_ERROR

  • Service 22DID 1998
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val40
Range
0 to 6.375 s
Unit
s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

2-3 shift time CRUZE_2_3_SHIFT_TIME

  • Service 22DID 1994
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val40
Range
0 to 6.375 s
Unit
s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

3-4 shift error CRUZE_3_4_SHIFT_ERROR

  • Service 22DID 1999
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val40
Range
0 to 6.375 s
Unit
s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

3-4 shift time CRUZE_3_4_SHIFT_TIME

  • Service 22DID 1995
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val40
Range
0 to 6.375 s
Unit
s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

14V auxiliary power module enable command CRUZE_14V_APM_ENABLE

  • Service 22DID 1C39
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val128
Range
0 to 1.99
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

14V power module set point CRUZE_14V_POWER_MODULE

  • Service 22DID 1C38
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×2051
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

14V power module set point voltage CRUZE_14V_POWER_MODULE_V

  • Service 22DID 1C47
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val10
Range
0 to 25.5 V
Unit
V

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Absolute load value LOAD_ABSSAE J1979Confirmed

Pelican can show this parameter as the absolute engine load.

  • Service 01PID 43
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
val×100255
Range
0 to 25700 %
Unit
%

Confirmed for 2013, 2015.

Active grille cold temperature mode CRUZE_ACTIVE_GRILLE_COLD_T

  • Service 22DID 239B
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Active grille shutter position CRUZE_ACTIVE_GRILLE_SHUTTER_POS

  • Service 22DID 2366
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×2051
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Active grille shutter position command CRUZE_ACTIVE_GRILLE

  • Service 22DID 2364
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×2051
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Air conditioning high side pressure CRUZE_AC_HIGH_SIDE_PConfirmed

  • Service 22DID 1564
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val×2.02
Range
0 to 515.1 psi
Unit
psi

0x32 = 50 → 50×2.02 = 101 psi

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Air filter life remaining CRUZE_AIRFILT_LIFE

  • Service 22DID 36A7
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Air flow rate from mass air flow sensor MAFSAE J1979Confirmed

Pelican can show this parameter as the mass air flow.

  • Service 01PID 10
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
val100
Range
0 to 655.35 g/s
Unit
g/s

Confirmed for 2013, 2015.

Air/fuel ratio, commanded CRUZE_AIR_FUEL_RAT_CMD

  • Service 22DID 119E
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val10
Range
0 to 25.5
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Ambient air temperature 2 CRUZE_AIR_TEMP_AMBIENT_2

  • Service 22DID 232C
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Balance rate, cylinder 1 CRUZE_BALANCE_RATE_CYL_1

  • Service 22DID 162F
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val64−512
Range
-512 to 511
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Balance rate, cylinder 2 CRUZE_BALANCE_RATE_CYL_2

  • Service 22DID 1630
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val64−512
Range
-512 to 511
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Balance rate, cylinder 3 CRUZE_BALANCE_RATE_CYL_3

  • Service 22DID 1631
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val64−512
Range
-512 to 511
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Balance rate, cylinder 4 CRUZE_BALANCE_RATE_CYL_4

  • Service 22DID 1632
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val64−512
Range
-512 to 511
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Barometric pressure BAROSAE J1979Confirmed

Normally obtained from one of a dedicated barometric sensor, a MAP sensor at key-on and during certain modes of driving, or inferred from a MAF sensor and other inputs during certain modes of driving. The control module reports BARO from whatever source it is derived from.

  • Service 01PID 33
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 kPa
Unit
kPa

Confirmed for 2013, 2015.

Barometric pressure CRUZE_BAROMETRIC_P_V8

  • Service 22DID 119D
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 kPa
Unit
kPa

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Barometric pressure, alternate CRUZE_BAROMETRIC_P_V6

  • Service 22DID 1251
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 kPa
Unit
kPa

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Boost pressure, actual CRUZE_BP_ACT

  • Service 22DID 20E3
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val×10010000
Range
0 to 655.35 kPa
Unit
kPa

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Boost pressure, desired CRUZE_BP_DESConfirmed

  • Service 22DID 328A
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val×10010000
Range
0 to 655.35 kPa
Unit
kPa

0x275E = 10078 → 10078×10010000 = 100.78 kPa

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Cabin A/C high side sensor voltage CRUZE_CABIN_AC_HIGH_SIDE_VConfirmed

  • Service 22DID 1144
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val50
Range
0 to 5.1 V
Unit
V

0x35 = 53 → 5350 = 1.06 V

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Calculated engine load LOAD_PCTSAE J1979Confirmed

Represents the amount of work the engine is doing. Expected to reach 100% at wide open throttle/wide open pedal at any altitude, temperature or rpm for both naturally aspirated and boosted engines. If engine load is limited for powertrain protection e.g. engine/turbocharger protection, this value may not reach 100%. For hybrid vehicles, indicates the torque produced only by the internal combustion engine, not the torque being delivered by the entire powertrain. For electric vehicles, the meaning of this parameter is undefined.

Pelican can show this parameter as the engine load.

  • Service 01PID 04
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

Calculated engine oil pressure CRUZE_EOP_CALC

  • Service 22DID 1C1B
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×400100
Range
0 to 1020 kPa
Unit
kPa

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Calculated engine oil temperature CRUZE_EOT_CALCConfirmed

Pelican can show this parameter as the engine oil temperature.

  • Service 22DID 1154
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

0x49 = 73 → 73−40 = 33 °C

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Catalyst temperature bank 1, sensor 1 CATEMP11SAE J1979Confirmed

  • Service 01PID 3C
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
val10−40
Range
-40 to 6513.5 °C
Unit
°C

Confirmed for 2013, 2015.

Commanded equivalence ratio EQ_RATSAE J1979Confirmed

Commanded fuel/air equivalence ratio (lambda): actual A/F ratio over stoichiometric A/F ratio, so above 1 is lean and below 1 is rich. Multiply by the fuel's stoichiometric A/F ratio for the commanded A/F ratio (gasoline: 14.64 x 0.95 = 13.9). Systems with conventional oxygen sensors show the commanded value in open loop and 1.000 in closed loop; systems with wide-range (linear) sensors show it in both. On engines whose banks are controlled independently, this is bank 1.

Pelican can show this parameter as the commanded lambda.

  • Service 01PID 44
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
val32768
Range
0 to 1.99
Unit
Number

Confirmed for 2013, 2015.

Commanded evaporative purge EVAP_PCTSAE J1979Confirmed

  • Service 01PID 2E
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

Commanded throttle actuator control TAC_PCTSAE J1979Confirmed

  • Service 01PID 4C
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

Cooling fan command CRUZE_COOLING_FAN_CMD

  • Service 22DID 3812
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Cooling fan motor command CRUZE_COOLING_FAN_MOTOR_CMD

  • Service 22DID 13AF
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Cruise control status CRUZE_CRUISE_CTRL_STATConfirmed

  • Service 22DID 2067
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Engine coolant temperature ECTSAE J1979Confirmed

Your engine temperature must operate within a certain temperature range to operate efficiently and safely. If it runs too hot, then your engine could be permanently damaged. If it runs too cold, then your engine will use more fuel than necessary.

Pelican can show this parameter as the engine coolant temperature.

  • Service 01PID 05
  • Module7E0 → 7E8
  • Every500 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

Confirmed for 2013, 2015.

Engine oil absolute pressure CRUZE_EOP_ABS

  • Service 22DID 2344
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×400100
Range
0 to 1020 kPa
Unit
kPa

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Engine oil life remaining CRUZE_EO_LIFE_REMAINING

  • Service 22DID 4DC0
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Engine oil pressure CRUZE_EOP

  • Service 22DID 2345
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×400100
Range
0 to 1020 kPa
Unit
kPa

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Engine oil pressure 2 CRUZE_EOP_2Confirmed

Reads 0 psi at the sensor's zero-pressure floor, raw 36; the 0.6 psi slope is not yet checked against a gauge.

  • Service 22DID 115C
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val×35−21.6
Range
-21.6 to 131.39 psi
Unit
psi

0x00 = 0 → 0×35−21.6 = -21.6 psi

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Engine oil pressure control solenoid valve command CRUZE_EOP_CTRL_SOLENOID_VALVE_CMD

  • Service 22DID 3318
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bit 0 of the reply.

Formula
val
Range
0 to 1
Unit
Off or on

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Engine oil temperature CRUZE_EOT

Pelican can show this parameter as the engine oil temperature.

  • Service 22DID 005C
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Engine RPM RPMSAE J1979Confirmed

Pelican can show this parameter as the engine speed.

  • Service 01PID 0C
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 15 of the reply, 16 bits.

Formula
val4
Range
0 to 16383.75 rpm
Unit
rpm

Confirmed for 2013, 2015.

Engine torque CRUZE_ENG_TQ

  • Service 22DID 19DE
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535 N·m
Unit
N·m

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Engine torque CRUZE_ENG_TQ_7E0

  • Service 22DID 203F
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val4
Range
0 to 16383 N·m
Unit
N·m

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Evaporative emissions purge CRUZE_EVAPORATIVE

  • Service 22DID 1170
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val2.55
Range
0 to 100 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Exhaust gas recirculation voltage CRUZE_EGR_VConfirmed

  • Service 22DID 114B
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val51
Range
0 to 5 V
Unit
V

0x00 = 0 → 051 = 0 V

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Fuel pressure FPSAE J1979Confirmed

  • Service 01PID 0A
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val×3
Range
0 to 765 kPa
Unit
kPa

Confirmed for 2013.

Heated oxygen sensor CRUZE_HEATED_OXYGEN_SENSConfirmed

  • Service 22DID 1145
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 mV
Unit
mV

0x00 = 0 → 0 mV

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Idle air control position CRUZE_IDLE_AIR_CTRL_POS

  • Service 22DID 1172
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Injector duty cycle bank 1 CRUZE_INJECTOR_DUTY_CYCLE_BANK_1Confirmed

  • Service 22DID 12C3
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val×15010000
Range
0 to 983.025 ms
Unit
ms

0x0000 = 0 → 0×15010000 = 0 ms

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Injector pulse width, cylinder 1 CRUZE_INJ_WIDTH_CYL_1

  • Service 22DID 1193
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val65.535
Range
0 to 1000 ms
Unit
ms

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Intake air temperature IATSAE J1979Confirmed

  • Service 01PID 0F
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

Confirmed for 2013, 2015.

Intake air temperature 2 CRUZE_IAT_2

  • Service 22DID 1538
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Intake manifold absolute pressure MAPSAE J1979Confirmed

  • Service 01PID 0B
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 kPa
Unit
kPa

Confirmed for 2013, 2015.

Knock retard CRUZE_KNOCK_RETARDConfirmed

  • Service 22DID 11A6
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val×22100
Range
0 to 56.1 °
Unit
°

0x00 = 0 → 0×22100 = 0 °

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Knock retard, alternate CRUZE_KNOCK_RETARD_ALT

  • Service 22DID 125D
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 °
Unit
°

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Knock sensor active counter CRUZE_KNOCK_SENS_ACTIVE

  • Service 22DID 125E
  • Module7E0 → 7E8
  • Every3600 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Last shift time CRUZE_LAST_SHIFT_TIME

  • Service 22DID 1992
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val40
Range
0 to 6.375 s
Unit
s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Long term fuel trim (bank 1) LONGFT1SAE J1979Confirmed

  • Service 01PID 07
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100128−100
Range
-100 to 99.2 %
Unit
%

Confirmed for 2013, 2015.

Mass airflow sensor CRUZE_MAFConfirmed

Pelican can show this parameter as the mass air flow.

  • Service 22DID 0010
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val×10010000
Range
0 to 655.35 g/s
Unit
g/s

0x0000 = 0 → 0×10010000 = 0 g/s

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

MIL cause CRUZE_MIL_CAUSEConfirmed

  • Service 22DID 135F
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x15 = 21 → 21

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

MIL status CRUZE_MIL_STATConfirmed

  • Service 22DID 2020
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Misfire history, cylinder 1 CRUZE_MIS_HISTORY_1Confirmed

  • Service 22DID 1201
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535
Unit
Number

0x0000 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Misfire history, cylinder 2 CRUZE_MIS_HISTORY_2Confirmed

  • Service 22DID 1202
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535
Unit
Number

0x0000 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Misfire history, cylinder 3 CRUZE_MIS_HISTORY_3Confirmed

  • Service 22DID 1203
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535
Unit
Number

0x0000 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Misfire history, cylinder 4 CRUZE_MIS_HISTORY_4Confirmed

  • Service 22DID 1204
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val
Range
0 to 65535
Unit
Number

0x0000 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Misfires, current, cylinder 1 CRUZE_MISFIRES_C1_CURConfirmed

  • Service 22DID 1206
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2012, 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2013, 2015. In testing for 2002 to 2006, 2009 to 2012, 2014, 2016.

Misfires, current, cylinder 2 CRUZE_MISFIRES_C2_CURConfirmed

  • Service 22DID 1205
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Misfires, current, cylinder 3 CRUZE_MISFIRES_C3_CURConfirmed

  • Service 22DID 1207
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Misfires, current, cylinder 4 CRUZE_MISFIRES_C4_CURConfirmed

  • Service 22DID 1208
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Outside air temperature CRUZE_AAT

  • Service 22DID 1161
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Pressure control solenoid current, actual CRUZE_P_CTRL_SOLENOID_ACT

  • Service 22DID 199E
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 mA
Unit
mA

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Pressure control solenoid current, reference CRUZE_P_CTRL_SOLENOID

  • Service 22DID 199F
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 mA
Unit
mA

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Remaining oil life CRUZE_REMAINING_OIL_LIFE

  • Service 22DID 119F
  • Module7E0 → 7E8
  • Every30 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 %
Unit
%

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Short term fuel trim (bank 1) SHRTFT1SAE J1979Confirmed

Correction being used by the closed-loop fuel algorithm.

Pelican can show this parameter as the short term fuel trim.

  • Service 01PID 06
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100128−100
Range
-100 to 99.2 %
Unit
%

Confirmed for 2013, 2015.

Timing advance SPARKADVSAE J1979Confirmed

Ignition timing spark advance for the first cylinder. Measured in degrees before dead center. Minus is degrees before dead center, positive is degrees after.

  • Service 01PID 0E
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val2−64
Range
-64 to 63.5 °
Unit
°

Confirmed for 2013, 2015.

Total knock retard CRUZE_TOTAL_KNOCK_RETARDConfirmed

  • Service 22DID 12D9
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val×45100
Range
0 to 114.75 °
Unit
°

0x00 = 0 → 0×45100 = 0 °

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Total misfire CRUZE_TOTAL_MISFIREConfirmed

  • Service 22DID 1200
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Transmission fluid temperature CRUZE_ATF_TConfirmed

Pelican can show this parameter as the transmission fluid temperature.

  • Service 22DID 1940
  • Module7E2 → 7EA
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

0x3D = 61 → 61−40 = 21 °C

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Transmission fluid temperature, variant 1 CRUZE_ATF_T_VAR_1Confirmed

Pelican can show this parameter as the transmission fluid temperature.

  • Service 22DID 1940
  • Module7E0 → 7E8
  • Every5 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

0x28 = 40 → 40−40 = 0 °C

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Transmission fluid temperature, variant 6 CRUZE_ATF_T_VAR_6Confirmed

Pelican can show this parameter as the transmission fluid temperature.

  • Service 22DID 280D
  • Module7E2 → 7EA
  • Every5 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

0x3F = 63 → 63−40 = 23 °C

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

OxygenSensors

02S Bank 1, Sensor 1 present O2S11_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 7 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

02S Bank 1, Sensor 2 present O2S12_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 6 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

02S Bank 1, Sensor 3 present O2S13_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 5 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

02S Bank 1, Sensor 4 present O2S14_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 4 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

02S Bank 2, Sensor 1 present O2S21_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 3 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

02S Bank 2, Sensor 2 present O2S22_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 2 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

02S Bank 2, Sensor 3 present O2S23_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 1 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

02S Bank 2, Sensor 4 present O2S24_EXISTSSAE J1979Confirmed

  • Service 01PID 13
  • Module7E0 → 7E8
  • Every3600 s

Bit 0 of the reply.

Formula
val
Range
0 to 1
Unit
No or yes

Confirmed for 2015. Supported for 2013.

O2S Output Voltage Bank 1, Sensor 1 O2S11SAE J1979Confirmed

  • Service 01PID 14
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val200
Range
0 to 1.275 V
Unit
V

Confirmed for 2015. Supported for 2013.

O2S Output Voltage Bank 1, Sensor 2 O2S12SAE J1979Confirmed

  • Service 01PID 15
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val200
Range
0 to 1.275 V
Unit
V

Confirmed for 2015. Supported for 2013.

SHRTFT associated with O2S11 SHRTFT11SAE J1979Confirmed

  • Service 01PID 14
  • Module7E0 → 7E8
  • Every1 s

Bits 8 to 15 of the reply, 8 bits.

Formula
val×100128−100
Range
-100 to 99.22 %
Unit
%

Confirmed for 2015. Supported for 2013.

Fuel

Alcohol fuel percentage ALCH_PCTSAE J1979Confirmed

Indicates the percentage of alcohol contained in ethanol or methanol fuels, if used. For example, ethanol fuel (E85) normally contains 85% ethanol, in which case this parameter will display 85%

  • Service 01PID 52
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013.

Ethanol content of fuel CRUZE_ETHANOL_CONTENT_FUELConfirmed

  • Service 22DID 0052
  • Module7E0 → 7E8
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

0x00 = 0 → 0×100255 = 0 %

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Fuel consumption rate CRUZE_FUEL_RATE

  • Service 22DID 005E
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val×50010000
Range
0 to 3276.75 L
Unit
L

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Fuel injection, cylinder 1 CRUZE_FUEL_INJECTION_C1

  • Service 22DID 20AC
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val×1010000
Range
0 to 65.535 ms
Unit
ms

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Fuel injection, cylinder 2 CRUZE_FUEL_INJECTION_C2

  • Service 22DID 1194
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val×100065535
Range
0 to 1000 ms
Unit
ms

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Fuel injection, cylinder 3 CRUZE_FUEL_INJECTION_C3

  • Service 22DID 1195
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val×100065535
Range
0 to 1000 ms
Unit
ms

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Fuel injection, cylinder 4 CRUZE_FUEL_INJECTION_C4

  • Service 22DID 1196
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val×100065535
Range
0 to 1000 ms
Unit
ms

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Fuel remaining CRUZE_FLIConfirmed

Pelican can show this parameter as the fuel tank level.

  • Service 22DID 002F
  • Module7E0 → 7E8
  • Every30 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

0xB6 = 182 → 182×100255 = 71.372549 %

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Fuel system 1 status FUELSYS1SAE J1979Confirmed

  • Service 01PID 03
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Unit
Named states
States
Raw valueStateMeaning
0OFFNo status reported: this fuel system is not running or not present, e.g. the engine is off
1OLOpen loop - has not yet satisfied conditions to go closed loop
2CLClosed loop - using oxygen sensor(s) as feedback for fuel control
4OL-DriveOpen loop due to driving conditions (e.g. power enrichment, deceleration enleanment)
8OL-FaultOpen loop - due to detected system fault
16CL-FaultClosed loop, but fault with at least one oxygen sensor - may be using single oxygen sensor for fuel control
32OL B2Open loop - has not yet satisfied conditions to go closed loop (Bank 2)
64OL-Drive B2Open loop due to driving conditions (Bank 2) (e.g. power enrichment, deceleration enleanment, cylinder deactivation)
68OL-Drive B1+B2Open loop due to driving conditions on bank 1 and bank 2 (e.g. power enrichment, deceleration enleanment, cylinder deactivation)
128OL-Fault B2Open loop - due to detected system fault (Bank 2)

Confirmed for 2015. Supported for 2013.

Fuel system 2 status FUELSYS2SAE J1979Confirmed

  • Service 01PID 03
  • Module7E0 → 7E8
  • Every250 ms

Bits 8 to 15 of the reply, 8 bits.

Unit
Named states
States
Raw valueStateMeaning
0OFFNo status reported: this fuel system is not running or not present, e.g. the engine is off
1OLOpen loop - has not yet satisfied conditions to go closed loop
2CLClosed loop - using oxygen sensor(s) as feedback for fuel control
4OL-DriveOpen loop due to driving conditions (e.g. power enrichment, deceleration enleanment)
8OL-FaultOpen loop - due to detected system fault
16CL-FaultClosed loop, but fault with at least one oxygen sensor - may be using single oxygen sensor for fuel control
32OL B2Open loop - has not yet satisfied conditions to go closed loop (Bank 2)
64OL-Drive B2Open loop due to driving conditions (Bank 2) (e.g. power enrichment, deceleration enleanment, cylinder deactivation)
68OL-Drive B1+B2Open loop due to driving conditions on bank 1 and bank 2 (e.g. power enrichment, deceleration enleanment, cylinder deactivation)
128OL-Fault B2Open loop - due to detected system fault (Bank 2)

Confirmed for 2015. Supported for 2013.

Fuel tank level FLISAE J1979Confirmed

Pelican can show this parameter as the fuel tank level.

  • Service 01PID 2F
  • Module7E0 → 7E8
  • Every1 s

Bits 0 to 7 of the reply, 8 bits.

Formula
val×100255
Range
0 to 100 %
Unit
%

Confirmed for 2013, 2015.

Fuel tank pressure CRUZE_FUEL_TANK_P

  • Service 22DID F432
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val33333.33333
Range
0 to 1.96 psi
Unit
psi

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Fuel temperature CRUZE_FUEL_T

  • Service 22DID 3218
  • Module7E0 → 7E8
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×50100
Range
0 to 127.5 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Total fuel consumption rate CRUZE_TOTAL_FUEL_CONSUMPTION_RATE

  • Service 22DID 009D
  • Module7E0 → 7E8
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits.

Formula
val×20010000
Range
0 to 1310.7 g/s
Unit
g/s

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Movement

Desired idle speed CRUZE_DES_IDLE_SPD

  • Service 22DID 1192
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val×12.5
Range
0 to 3187.5 rpm
Unit
rpm

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Torque converter clutch slip speed CRUZE_TC_SLIP_VSSConfirmed

  • Service 22DID 1991
  • Module7E2 → 7EA
  • Every250 ms
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
val×125010000
Range
-4096 to 4095.875 rpm
Unit
rpm

0x0000 = 0 → 0×125010000 = 0 rpm

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Torque converter clutch slip speed CRUZE_TQ_CONV_CLU_SLIP_SPD

  • Service 22DID 1991
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
val8
Range
-4096 to 4095.875 rpm
Unit
rpm

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Vehicle speed CRUZE_VSSConfirmed

Pelican can show this parameter as the speed.

  • Service 22DID 000D
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 2002 to 2006, 2009 to 2012, 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

0x00 = 0 → 0 km/h

Confirmed for 2013, 2015. In testing for 2002 to 2006, 2009 to 2012, 2014, 2016.

Vehicle speed VSSSAE J1979Confirmed

Pelican can show this parameter as the speed.

  • Service 01PID 0D
  • Module7E0 → 7E8
  • Every250 ms

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 km/h
Unit
km/h

Confirmed for 2013, 2015.

OBD

OBD requirements to which vehicle is designed OBDSUPSAE J1979Confirmed

  • Service 01PID 1C
  • Module7E0 → 7E8
  • Every3600 s

Bits 0 to 7 of the reply, 8 bits.

Unit
Named states
States
Raw valueStateMeaning
1OBD IIOBD II (California ARB)
2OBDOBD (Federal EPA)
3OBD & OBD II
4OBD I
5NO OBDNot OBD compliant
6EOBD
7EOBD & OBD II
8EOBD & OBD
9EOBD, OBD, OBD II
10JOBD
11JOBD & OBD II
12JOBD & EOBD
13JOBD, EOBD, OBD II
14EURO IV B1Heavy duty vehicles (EURO IV) B1
15EURO V B2Heavy duty vehicles (EURO V) B2
16EURO CHeavy duty vehicles (EURO EEC) C (gas engines)
17EMDEngine manufacturer diagnostics (EMD)
18EMD+Engine Manufacturer Diagnostics Enhanced (EMD+)
19HD OBD-CHeavy Duty On-Board Diagnostics (Child/Partial)
20HD OBDHeavy Duty On-Board Diagnostics
21WWH OBDWorld Wide Harmonized OBD
23HD EOBD-IHeavy Duty Euro OBD Stage I without NOx Control
24HD EOBD-I NHeavy Duty Euro OBD Stage I with NOx Control
25HD EOBD-IIHeavy Duty Euro OBD Stage II without NOx Control
26HD EOBD-II NHeavy Duty Euro OBD Stage II with NOx Control
27HD-ZEVHeavy Duty ZEV
28OBDBr-1Brazil OBD Phase 1
29OBDBr-2Brazil OBD Phase 2 and Phase 2+
30KOBDKorean OBD
31IOBD-I-BS4India BS4 OBD I
32IOBD-II-BS4India BS4 OBD II
33HD EOBD-VIEuro VI
34OBD, OBD II and HD OBD
35OBDBr-3Brazil OBD Phase 3
36MC EOBD-IMotorcycle, Euro OBD-I
37MC EOBD-IIMotorcycle, Euro OBD-II
38MC COBD-IMotorcycle, China OBD-I
39MC TOBD-IMotorcycle, Taiwan OBD-I
40MC JOBD-IMotorcycle, Japan OBD-I
41CN-OBD-6China Nationwide Stage 6
42OBDBr-P7Brazil OBD Phase 7
43CN-HDOBD-VIChina Heavy Duty VI
44IOBD-I-BS6India BS6 OBD I
45IOBD-II-BS6India BS6 OBD II
46IHDOBD-BSVIIndia BSVI HD OBD
47OBDBr-P8Brazil OBD Phase 8
48HD-JOBD-IIJapan Heavy Duty OBD-II
49HD-KOBD-IIKorea Heavy Duty OBD-II
50CN-OROBD-IVChina Off-Road IV OBD
51CARB ACC-IILight Duty ZEV, ACC-II
52MC JOBD-IIMotorcycle, Japan OBD-II
53MC CARB OBDMotorcycle, California (CARB) OBD
54MC EPA OBDMotorcycle, Federal (EPA) OBD
55MC CARB & EPA OBDMotorcycle, 50-State (CARB & EPA) OBD
56HD ZEV CARB ZEPHeavy Duty ZEV, CARB ZEP
57CARB ACC-II & EPA TIER4Light Duty ZEV, CARB ACC-II and EPA Tier 4 (GTR 22)
58EPA TIER4Light Duty ZEV, EPA Tier 4 (GTR 22)
59EPA HDEPA HD OBD

Confirmed for 2013, 2015.

Tires

Front left tire pressure CRUZE_TP_FL_241Confirmed

Pelican can show this parameter as the front left tire pressure.

  • Service 22DID 5005
  • Module241 → 641
  • Every15 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val16
Range
0 to 4095.9375 kPa
Unit
kPa

0x0DC0 = 3520 → 352016 = 220 kPa

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Front left tire sensor ID CRUZE_TID_FLConfirmed

  • Service 22DID 4005
  • Module241 → 641
  • Every3600 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 31 of the reply, 32 bits.

Formula
val
Range
0 to 4294967295
Unit
Hexadecimal

0xFFFFFFFF = 4294967295 → 4,294,967,295

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Front right tire pressure CRUZE_TP_FR_241Confirmed

Pelican can show this parameter as the front right tire pressure.

  • Service 22DID 5006
  • Module241 → 641
  • Every15 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val16
Range
0 to 4095.9375 kPa
Unit
kPa

0x0DC0 = 3520 → 352016 = 220 kPa

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Front right tire sensor ID CRUZE_TID_FRConfirmed

  • Service 22DID 4006
  • Module241 → 641
  • Every3600 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 31 of the reply, 32 bits.

Formula
val
Range
0 to 4294967295
Unit
Hexadecimal

0xFFFFFFFF = 4294967295 → 4,294,967,295

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Left front tire pressure CRUZE_TP_FL

Pelican can show this parameter as the front left tire pressure.

  • Service 22DID 248E
  • Module7E0 → 7E8
  • Every15 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 psi
Unit
psi

In testing for 2002 to 2006, 2009 to 2012, 2014, 2016. Not supported for 2013, 2015.

Left rear tire pressure CRUZE_TP_RL

Pelican can show this parameter as the rear left tire pressure.

  • Service 22DID 2491
  • Module7E0 → 7E8
  • Every15 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 psi
Unit
psi

In testing for 2002 to 2006, 2009 to 2012, 2014, 2016. Not supported for 2013, 2015.

Rear left tire pressure CRUZE_TP_RL_241Confirmed

Pelican can show this parameter as the rear left tire pressure.

  • Service 22DID 5008
  • Module241 → 641
  • Every15 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val16
Range
0 to 4095.9375 kPa
Unit
kPa

0x0DC0 = 3520 → 352016 = 220 kPa

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Rear left tire sensor ID CRUZE_TID_RLConfirmed

  • Service 22DID 4008
  • Module241 → 641
  • Every3600 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 31 of the reply, 32 bits.

Formula
val
Range
0 to 4294967295
Unit
Hexadecimal

0xFFFFFFFF = 4294967295 → 4,294,967,295

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Rear right tire pressure CRUZE_TP_RR_241Confirmed

Pelican can show this parameter as the rear right tire pressure.

  • Service 22DID 5007
  • Module241 → 641
  • Every15 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits.

Formula
val16
Range
0 to 4095.9375 kPa
Unit
kPa

0x0DC0 = 3520 → 352016 = 220 kPa

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Rear right tire sensor ID CRUZE_TID_RRConfirmed

  • Service 22DID 4007
  • Module241 → 641
  • Every3600 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 31 of the reply, 32 bits.

Formula
val
Range
0 to 4294967295
Unit
Hexadecimal

0xFFFFFFFF = 4294967295 → 4,294,967,295

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Right front tire pressure CRUZE_TP_FR

Pelican can show this parameter as the front right tire pressure.

  • Service 22DID 248F
  • Module7E0 → 7E8
  • Every15 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 psi
Unit
psi

In testing for 2002 to 2006, 2009 to 2012, 2014, 2016. Not supported for 2013, 2015.

Right rear tire pressure CRUZE_TP_RR

Pelican can show this parameter as the rear right tire pressure.

  • Service 22DID 2490
  • Module7E0 → 7E8
  • Every15 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255 psi
Unit
psi

In testing for 2002 to 2006, 2009 to 2012, 2014, 2016. Not supported for 2013, 2015.

Transmission

Clutch slip, AT C1, ring CRUZE_CLU_SLIP_C1_RING

  • Service 22DID 2851
  • Module7E2 → 7EA
  • Every1 s
  • Testing

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
val4
Range
-8192 to 8191 rpm
Unit
rpm

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Clutch slip, AT C3, ring CRUZE_CLU_SLIP_C3_RINGConfirmed

  • Service 22DID 19D4
  • Module7E2 → 7EA
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
val4
Range
-8192 to 8191 rpm
Unit
rpm

0x0000 = 0 → 04 = 0 rpm

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Current gear CRUZE_CURRENT_GEAR

  • Service 22DID 1B30
  • Module7E2 → 7EA
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−3
Range
-3 to 252
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Current gear CRUZE_CURRENT_GEAR_7E0

  • Service 22DID 199A
  • Module7E0 → 7E8
  • Every250 ms
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Current gear, variant 2 CRUZE_CURRENT_GEAR_VAR_2Confirmed

  • Service 22DID 199A
  • Module7E2 → 7EA
  • Every250 ms
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x01 = 1 → 1

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Current gear, variant 3 CRUZE_CURRENT_GEAR_VAR_3Confirmed

  • Service 22DID 3201
  • Module7E0 → 7E8
  • Every250 ms
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 7 of the reply, 8 bits.

Formula
val
Range
0 to 255
Unit
Number

0x00 = 0 → 0

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Transmission fluid temperature, filtered CRUZE_TF_T_FLTED

Pelican can show this parameter as the transmission fluid temperature.

  • Service 22DID 295A
  • Module7E2 → 7EA
  • Every5 s
  • Testing

Bits 0 to 7 of the reply, 8 bits.

Formula
val−40
Range
-40 to 215 °C
Unit
°C

In testing for 2002 to 2006, 2009 to 2014, 2016. Not supported for 2015.

Transmission input shaft speed, 2 CRUZE_TRANS_ISSConfirmed

  • Service 22DID 1941
  • Module7E2 → 7EA
  • Every1 s
  • Testing for 2002 to 2006, 2009 to 2014, 2016

Example reply from a 2015 Holden Cruze.

Bits 0 to 15 of the reply, 16 bits. The value is signed.

Formula
val4
Range
-8192 to 8191 rpm
Unit
rpm

0x0000 = 0 → 04 = 0 rpm

Confirmed for 2015. In testing for 2002 to 2006, 2009 to 2014, 2016.

Keyboard shortcuts

jkor↓↑
Move down or up through a list or a grid.
hlor←→
Move across a row or between cards.
Enter
Open the focused link.
for/
Open the current focus area's filter.
↓
In a filter, move to the first result.
Esc
Close a filter or a dialog.
?
Show these shortcuts.