Mercedes-Benz A 180 OBD-II support
Model years 1997 to 2026CombustionOnboarded
The OBDb lists 18 parameters for the Mercedes-Benz A 180, read from 3 control modules. Real responses from Mercedes-Benz A 180 cars confirm 2 of the parameters. Drivers have tested model years 2011, 2015, 2017 to 2018.
Support by model year
A solid mark means a real response confirmed the parameter. A light mark means the car's signalset reads it but no response has confirmed it yet.
| Year | Status | Fuel | Speed | Range | OdoOdometer | Tires |
|---|---|---|---|---|---|---|
| 1997 to 2003 | Onboarded | Fuel tank level: No data | Speed: No data | Range: No data | Odometer: No data | Tire pressures: No data |
| 2004 to 2026 | Onboarded | Estimated | Odometer: No data | Tire pressures: No data |
Confirmed by a real response Read by the signalset, not yet confirmed
Parameters
The parameters of the Mercedes-Benz A 180, by group. These are the commands that Mercedes-Benz added, and the SAE J1979 standard parameters that real cars confirm. Open a group to see its parameters, how Pelican decodes each one, and the model years that real cars confirm.
Connectables16
Absolute throttle position, Air flow rate from mass air flow sensor, Calculated engine load, Commanded equivalence ratio and 12 moreAll parameters confirmed16/16Battery3
Control module voltage, Service 22 2005 raw value, Service 22 2526 raw valueAll parameters confirmed3/3Climate1
Ambient air temperatureConfirmed1/1Clocks1
Time since engine startConfirmed1/1Control1
Absolute throttle positionConfirmed1/1DTCs6
Distance traveled since diagnostic trouble codes cleared, Distance traveled while MIL was activated, Malfunction indicator lamp, Number of DTCs stored in this ECU and 2 moreAll parameters confirmed6/6DTCs › Status11
A/C system refrigerant monitoring ready, Catalyst monitoring ready, Comprehensive component monitoring ready, EGR system monitoring ready and 7 moreAll parameters confirmed11/11DTCs › Support12
A/C system refrigerant monitoring supported, Catalyst monitoring supported, Comprehensive component monitoring supported, Compression ignition monitoring supported and 8 moreAll parameters confirmed12/12Engine32
Air flow rate from mass air flow sensor, Barometric pressure, Boost air temperature, Boost pressure and 28 more26 of 32 parameters confirmed6 being tested26/32Engine › Internal20
Boost pressure A control status supported, Boost pressure A supported, Boost pressure B control status supported, Boost pressure B supported and 16 moreAll parameters confirmed20/20Engine › OxygenSensors4
Lambda value, Equivalence Ratio Bank 1, Sensor 1, Lambda value, Equivalence Ratio Bank 1, Sensor 1, Wide Range O2S Current, O2 Sensor Bank 1, Sensor 1, Wide Range O2S Voltage, O2 Sensor Bank 1, Sensor 1All parameters confirmed4/4Fuel10
Commanded Fuel Rail Pressure A, Commanded Fuel Rail Pressure B, Fuel rail pressure, Fuel Rail Pressure A and 6 more7 of 10 parameters confirmed3 being tested7/10Fuel › Internal6
Commanded Fuel Rail Pressure A data supported?, Commanded Fuel Rail Pressure B data supported?, Fuel Rail Pressure A data supported?, Fuel Rail Pressure B data supported? and 2 moreAll parameters confirmed6/6Movement1
Vehicle speedConfirmed1/1OBD1
OBD requirements to which vehicle is designedConfirmed1/1Transmission6
Current gear, Torque converter slip, Transmission fluid temperature, variant 1, Transmission fluid temperature, variant 2 and 2 more6 being tested0/6Trips1
Odometer1 being tested0/1
Help onboard this car
Help onboard more cars to the OBDb simply by installing Pelican, connecting your OBD scanner, and driving. Joining the beta testing crew gives you early access to upcoming Pelican features through limited-access TestFlight builds.
