Mercedes-Benz ML 350 OBD-II support
Model years 2006 to 2015CombustionTester needed
13 miles driven with Pelican by 1 driver
21 kilometers driven with Pelican by 1 driver
The OBDb lists 16 parameters for the Mercedes-Benz ML 350, read from 2 control modules. No driver has confirmed any of the parameters with a real response yet. Drivers have tested model years 2006, 2013.
Support by model year
A solid mark means a real response confirmed the parameter. A light mark means the car's signalset reads it but no response has confirmed it yet.
| Year | Status | Fuel | Speed | Range | OdoOdometer | Tires |
|---|---|---|---|---|---|---|
| 2006 to 2015 | Tester needed | Estimated | Odometer: No data | Tire pressures: No data |
Confirmed by a real response Read by the signalset, not yet confirmed
Parameters
The parameters of the Mercedes-Benz ML 350, by group. These are the commands that Mercedes-Benz added, and the SAE J1979 standard parameters that real cars confirm. Open a group to see its parameters, how Pelican decodes each one, and the model years that real cars confirm.
Connectables15
Absolute throttle position, Air flow rate from mass air flow sensor, Calculated engine load, Commanded equivalence ratio and 11 moreAll parameters confirmed15/15Battery1
Control module voltageConfirmed1/1Climate1
Ambient air temperatureConfirmed1/1Clocks1
Time since engine startConfirmed1/1Control2
Absolute throttle position, Relative throttle positionAll parameters confirmed2/2Control › Pedals2
Accelerator pedal position D, Accelerator pedal position EAll parameters confirmed2/2DTCs5
Distance traveled since diagnostic trouble codes cleared, Distance traveled while MIL was activated, Malfunction indicator lamp, Number of DTCs stored in this ECU and 1 moreAll parameters confirmed5/5DTCs › Status11
A/C system refrigerant monitoring ready, Catalyst monitoring ready, Comprehensive component monitoring ready, EGR system monitoring ready and 7 moreAll parameters confirmed11/11DTCs › Support12
A/C system refrigerant monitoring supported, Catalyst monitoring supported, Comprehensive component monitoring supported, Compression ignition monitoring supported and 8 moreAll parameters confirmed12/12Engine27
Air flow rate from mass air flow sensor, Barometric pressure, Boost air temperature, Boost pressure and 23 more21 of 27 parameters confirmed6 being tested21/27Engine › Internal14
Commanded Throttle Actuator A Control supported?, Commanded Throttle Actuator B Control supported?, IAT Bank 1, Sensor 1 supported, IAT Bank 1, Sensor 1 supported and 10 moreAll parameters confirmed14/14Engine › OxygenSensors4
Lambda value, Equivalence Ratio Bank 1, Sensor 1, Lambda value, Equivalence Ratio Bank 1, Sensor 1, Wide Range O2S Current, O2 Sensor Bank 1, Sensor 1, Wide Range O2S Voltage, O2 Sensor Bank 1, Sensor 1All parameters confirmed4/4Fuel10
Commanded Fuel Rail Pressure A, Commanded Fuel Rail Pressure B, Fuel rail pressure, Fuel Rail Pressure A and 6 more7 of 10 parameters confirmed3 being tested7/10Fuel › Internal6
Commanded Fuel Rail Pressure A data supported?, Commanded Fuel Rail Pressure B data supported?, Fuel Rail Pressure A data supported?, Fuel Rail Pressure B data supported? and 2 moreAll parameters confirmed6/6Movement1
Vehicle speedConfirmed1/1OBD1
OBD requirements to which vehicle is designedConfirmed1/1Transmission6
Current gear, Torque converter slip, Transmission fluid temperature, variant 1, Transmission fluid temperature, variant 2 and 2 more6 being tested0/6Trips1
Odometer1 being tested0/1
Help onboard this car
Help onboard more cars to the OBDb simply by installing Pelican, connecting your OBD scanner, and driving. Joining the beta testing crew gives you early access to upcoming Pelican features through limited-access TestFlight builds.
