Mercedes-Benz B-Class OBD-II support
Model years 2005 to 2026CombustionTester needed
377 miles driven with Pelican by 3 drivers
607 kilometers driven with Pelican by 3 drivers
The OBDb lists 16 parameters for the Mercedes-Benz B-Class, read from 2 control modules. No driver has confirmed any of the parameters with a real response yet. Drivers have tested model years 2011, 2017.
Support by model year
A solid mark means a real response confirmed the parameter. A light mark means the car's signalset reads it but no response has confirmed it yet.
| Year | Status | Fuel | Speed | Range | OdoOdometer | Tires |
|---|---|---|---|---|---|---|
| 2005 to 2018 | Tester needed | Estimated | Odometer: No data | Tire pressures: No data | ||
| 2019 to 2026 | Tester needed | Fuel tank level: No data | Speed: No data | Range: No data | Odometer: No data | Tire pressures: No data |
Confirmed by a real response Read by the signalset, not yet confirmed
Parameters
The parameters of the Mercedes-Benz B-Class, by group. These are the commands that Mercedes-Benz added, and the SAE J1979 standard parameters that real cars confirm. Open a group to see its parameters, how Pelican decodes each one, and the model years that real cars confirm.
- Connectables12
- Battery1
- Climate1
- Clocks1
- Control Pedals2
- DTCs52
- Engine54
- Fuel18
- Movement1
- OBD1
- Transmission6
- Trips1
Connectables12
Absolute load value, Air flow rate from mass air flow sensor, Calculated engine load, Commanded equivalence ratio and 8 moreAll parameters confirmed12/12Battery1
Control module voltageConfirmed1/1Climate1
Ambient air temperatureConfirmed1/1Clocks1
Time since engine startConfirmed1/1Control Pedals2
Accelerator pedal position D, Accelerator pedal position EAll parameters confirmed2/2DTCs6
Distance traveled since diagnostic trouble codes cleared, Distance traveled while MIL was activated, Malfunction indicator lamp, Number of DTCs stored in this ECU and 2 moreAll parameters confirmed6/6DTCs › Status30
A/C system refrigerant monitoring, A/C system refrigerant monitoring completed, A/C system refrigerant monitoring ready, Catalyst monitoring and 26 moreAll parameters confirmed30/30DTCs › Support16
A/C system refrigerant monitoring supported, Catalyst monitoring supported, Comprehensive component monitoring enabled, Comprehensive component monitoring supported and 12 moreAll parameters confirmed16/16Engine36
Absolute load value, Air flow rate from mass air flow sensor, Barometric pressure, Boost air temperature and 32 more30 of 36 parameters confirmed6 being tested30/36Engine › Internal18
Boost pressure A control status supported, Boost pressure A supported, Boost pressure B control status supported, Boost pressure B supported and 14 moreAll parameters confirmed18/18Fuel12
Commanded Fuel Rail Pressure A, Commanded Fuel Rail Pressure B, Fuel rail pressure, Fuel Rail Pressure A and 8 more9 of 12 parameters confirmed3 being tested9/12Fuel › Internal6
Commanded Fuel Rail Pressure A data supported?, Commanded Fuel Rail Pressure B data supported?, Fuel Rail Pressure A data supported?, Fuel Rail Pressure B data supported? and 2 moreAll parameters confirmed6/6Movement1
Vehicle speedConfirmed1/1OBD1
OBD requirements to which vehicle is designedConfirmed1/1Transmission6
Current gear, Torque converter slip, Transmission fluid temperature, variant 1, Transmission fluid temperature, variant 2 and 2 more6 being tested0/6Trips1
Odometer1 being tested0/1
CarPlay
Apple lists CarPlay for the Mercedes-Benz B-Class in model years 2016 to 2025.
CarPlay can change with the market and the trim level. Ask the dealer about a specific car.
Help onboard this car
Help onboard more cars to the OBDb simply by installing Pelican, connecting your OBD scanner, and driving. Joining the beta testing crew gives you early access to upcoming Pelican features through limited-access TestFlight builds.
