Volvo S40 OBD-II support
Model years 1996 to 2012CombustionTester needed
4,790 miles driven with Pelican by 5 drivers
7,709 kilometers driven with Pelican by 5 drivers
The OBDb lists 4 parameters for the Volvo S40, read from 2 control modules. No driver has confirmed any of the parameters with a real response yet. Drivers have tested model years 2008, 2011.
Support by model year
A solid mark means a real response confirmed the parameter. A light mark means the car's signalset reads it but no response has confirmed it yet.
| Year | Status | Fuel | Speed | Range | OdoOdometer | Tires |
|---|---|---|---|---|---|---|
| 1996 to 2002 | Tester needed | Fuel tank level: No data | Speed: No data | Range: No data | Odometer: No data | Tire pressures: No data |
| 2003 to 2012 | Tester needed | Estimated | Odometer: No data | Tire pressures: No data |
Confirmed by a real response Read by the signalset, not yet confirmed
Parameters
The parameters of the Volvo S40, by group. These are the commands that Volvo added, and the SAE J1979 standard parameters that real cars confirm. Open a group to see its parameters, how Pelican decodes each one, and the model years that real cars confirm.
Connectables16
Absolute load value, Absolute throttle position, Absolute throttle position B, Air flow rate from mass air flow sensor and 12 more14 of 16 parameters confirmed2 being tested14/16Battery1
Control module voltageConfirmed1/1Climate1
Ambient air temperatureConfirmed1/1Clocks1
Time since engine startConfirmed1/1Control3
Absolute throttle position, Absolute throttle position B, Relative throttle positionAll parameters confirmed3/3Control › Pedals2
Accelerator pedal position D, Accelerator pedal position EAll parameters confirmed2/2DTCs5
Distance traveled since diagnostic trouble codes cleared, Distance traveled while MIL was activated, Malfunction indicator lamp, Number of DTCs stored in this ECU and 1 moreAll parameters confirmed5/5DTCs › Status30
A/C system refrigerant monitoring, A/C system refrigerant monitoring completed, A/C system refrigerant monitoring ready, Catalyst monitoring and 26 moreAll parameters confirmed30/30DTCs › Support16
A/C system refrigerant monitoring supported, Catalyst monitoring supported, Comprehensive component monitoring enabled, Comprehensive component monitoring supported and 12 moreAll parameters confirmed16/16Engine19
Absolute load value, Air flow rate from mass air flow sensor, Barometric pressure, Calculated engine load and 15 more18 of 19 parameters confirmed1 being tested18/19Engine › OxygenSensors11
02S Bank 1, Sensor 1 present, 02S Bank 1, Sensor 2 present, 02S Bank 1, Sensor 3 present, 02S Bank 1, Sensor 4 present and 7 moreAll parameters confirmed11/11Fuel4
Fuel pressure, Fuel system 1 status, Fuel system 2 status, Fuel tank level3 of 4 parameters confirmed1 being tested3/4Movement1
Vehicle speedConfirmed1/1OBD1
OBD requirements to which vehicle is designedConfirmed1/1Transmission2
Transmission fluid temperature, Transmission fluid temperature2 being tested0/2
Help onboard this car
Help onboard more cars to the OBDb simply by installing Pelican, connecting your OBD scanner, and driving. Joining the beta testing crew gives you early access to upcoming Pelican features through limited-access TestFlight builds.
