Volvo V40 OBD-II support
Model years 2012 to 2019CombustionTester needed
1,414 miles driven with Pelican by 7 drivers
2,276 kilometers driven with Pelican by 7 drivers
The OBDb lists 308 parameters for the Volvo V40, read from 20 control modules. No driver has confirmed any of the parameters with a real response yet. Drivers have tested model years 2016.
Support by model year
A solid mark means a real response confirmed the parameter. A light mark means the car's signalset reads it but no response has confirmed it yet.
| Year | Status | Fuel | Speed | Range | OdoOdometer | Tires |
|---|---|---|---|---|---|---|
| 2012 to 2019 | Tester needed | Estimated | Tire pressures: No data |
Confirmed by a real response Read by the signalset, not yet confirmed
Parameters
The parameters of the Volvo V40, by group. These are the commands that Volvo added, and the SAE J1979 standard parameters that real cars confirm. Open a group to see its parameters, how Pelican decodes each one, and the model years that real cars confirm.
- Connectables33
- Battery28
- Climate1
- Clocks1
- Control15
- Doors4
- DTCs28
- Engine204
- Fuel19
- Lights1
- Movement11
- OBD1
- Tires11
- Transmission12
- Trips28
Connectables33
Absolute load value, Air flow rate from mass air flow sensor, Battery voltage, Calculated engine load and 29 more11 of 33 parameters confirmed22 being tested11/33Battery28
All-wheel drive coupling module voltage, Alternator charge voltage request, Battery charge balance, ah, Battery charge, amps and 24 more28 being tested0/28Climate1
Ambient air temperatureConfirmed1/1Clocks1
Time since engine startConfirmed1/1Control15
Brake pedal position, Brake pressure, Brake pressure sensor offset, Brake switch and 11 more15 being tested0/15Doors4
Drivers door rear mirror x-axis, Drivers door rear mirror y-axis, Passenger door rear mirror x-axis, Passenger door rear mirror x-axis4 being tested0/4DTCs5
Distance traveled since diagnostic trouble codes cleared, Distance traveled while MIL was activated, Malfunction indicator lamp, Number of DTCs stored in this ECU and 1 moreAll parameters confirmed5/5DTCs › Status11
A/C system refrigerant monitoring ready, Catalyst monitoring ready, Comprehensive component monitoring ready, EGR system monitoring ready and 7 moreAll parameters confirmed11/11DTCs › Support12
A/C system refrigerant monitoring supported, Catalyst monitoring supported, Comprehensive component monitoring supported, Compression ignition monitoring supported and 8 moreAll parameters confirmed12/12Engine202
- pedal position sensor, Absolute load value, Accelerator pedal position, Adaptive cruise target vehicle and 198 more19 of 202 parameters confirmed183 being tested19/202Engine › OxygenSensors2
Lambda value, Equivalence Ratio Bank 1, Sensor 1, Wide Range O2S Current, O2 Sensor Bank 1, Sensor 1All parameters confirmed2/2Fuel19
Fuel filter heater, Fuel filter heater, Fuel level 1 of 2, Fuel level 2 of 2 ejector side saddle tank and 15 more3 of 19 parameters confirmed16 being tested3/19Lights1
Brake light switch1 being tested0/1Movement11
Accelerator pedal position, Adaptive cruise set speed, Cabin fan speed, requested, Indirect tire pressure monitoring high speed calibration and 7 more1 of 11 parameters confirmed10 being tested1/11OBD1
OBD requirements to which vehicle is designedConfirmed1/1Tires11
Front left wheel speed, Front left wheel speed, Front right wheel speed, Front right wheel speed and 7 more11 being tested0/11Transmission12
A/T converter, AT, actual gear ratio, Gear ratio expected, Gear ratio, actual and 8 more12 being tested0/12Trips28
All-wheel drive coupling distance, Distance since last service, Distance to empty, Front left distance and 24 more28 being tested0/28
Help onboard this car
Help onboard more cars to the OBDb simply by installing Pelican, connecting your OBD scanner, and driving. Joining the beta testing crew gives you early access to upcoming Pelican features through limited-access TestFlight builds.
